Driving, Hazardous Material Transport, HGV Training, Transport and Logistics
Desktop Simulation, E-Learning, Gamified Training
7 Interactive training modules for Nutrien's hazardous material HGV training courses
Snippet from one of Nutrien’s interactive HGV driver training courses
CLIENT
Nutrien Ag Solutions
OBJECTIVE
Provide Nutrien’s truck drivers with comprehensive HGV training courses using gamified E-learning, based on where their professional drivers are failing at most.
APPROACH
We had some of our team visit Nutrien’s site to take pictures of vehicle interiors and exteriors, and engage in discussions with Nutrien representatives.
We created detailed 3d models and environment for the various vehicles and locations, providing users with a realistic simulation of the potential hazards they might encounter in the real-world.
This would replace physical HGV training courses, or classroom based HGV training courses with a comprehensive virtual and immersive driver training course.
Nutrien’s experienced heavy goods and hazardous materials truck drivers were facing uncommon accidents which don’t have any specific existing training due to their rarity. They needed an all-in-one training solution that allowed drivers to practice and master the correct actions to take in these scenarios.
We developed 7 bespoke scenarios to address the specific accidents identified by Nutrien. Each scenario offers an instructional training phase, a practice phase without hints, and an assessment mode that seamlessly integrates with Nutrien’s existing LMS. Users would access the different modules via 2 modes, Train and Practice mode, and a separate final assessment mode.
Training Phase – User goes through the driving experience with accurate driving animations and pauses during key moments where users receive voiced instructions highlighting all details which need to be taught for any specific moment depending on the module.
Practice Phase – Instantly after a training phase is completed, a practice phase begins, placing the user into the beginning of the scenario to complete it without automatic hints/directions, if a user fails a segment of the scenario, they are given a hint and rewinded backwards to try again until they can reach the end successfully.
Assessment Phase – The player goes through all 7 modules, receiving no hints whatsoever, and if they fail, they get skipped to the next step or scenario. This acts as a final test for the user and all data is tracked in Nutrien’s LMS.
When a high center of gravity vehicle takes a turn at too high of a speed, it will cause a hazard and tip over. Curve speed limit signs display a higher speed limit to what truck drivers should follow, and truck drivers with high center of gravity of vehicles should aim for an even lower speed to what the s-curve speed limit sign says.
The driver will understand the hazards associated with taking turns and s-curves at an inappropriate speed due to high center of gravity of different vehicles, specifically while being immersed in a truck driving simulation of one of Nutrien’s semi trucks with tankers.
There are many guidelines to follow when crossing a railroad crossing, and drivers don’t always follow proper procedure due to lack of training or confusion in the moment. This module aims to train drivers to look both ways during train crossing – no matter what the lights and barriers are doing and stop a good distance from the track. Ensuring that they know they shouldn’t change gears when crossing due to stalling. They must follow these rules when crossing the track:
Stop your vehicle within 50ft of the tracks.
Don’t stop the vehicle closer than 15ft from the tracks.
Always listen, and look both left and right, directly before crossing the tracks.
Never change gears while crossing the track.
Driver must know they can completely clear the tracks and cross arms on the opposite side. Do not cross if traffic is present or if intersection is too close to tracks.
When a high center of gravity vehicle takes a turn at too high of a speed, it will cause a hazard and tip over. Curve speed limit signs display a higher speed limit to what truck drivers should follow, and truck drivers with high center of gravity of vehicles should aim for an even lower speed to what the s-curve speed limit sign says.
The driver will understand the hazards associated with taking turns and s-curves at an inappropriate speed due to high center of gravity of different vehicles, specifically while being immersed in a truck driving simulation of one of Nutrien’s fertilizer trucks.
Drivers will sometimes not properly secure there cargo according to all of Nutrien Ag Solution guidelines.
The driver will understand all the requirements of securing cargo on their trucks, to reduce the chances of causing a hazard with fallen cargo.
Drivers will experience a simulation of a cargo hazard and be taught all the necessary steps they are expected to take in response to the unfortunate incident of a cargo hazard on the road.
In this scenario the trainee is driving a tandem ammonia trailer attached to the pickup truck. A tractor unit pulling a 44’ tandem ammonia trailer turning right off a grid road onto a narrow field approach.
The farm entrance is narrow and has steep edges. It’s a risk that the farm trailer could get stuck having wider turn arc than the truck. The driver will be taught and tested on taking the appropriate steps for making a correct and safe approach into the farm.
Heavy goods vehicles have a risk of rolling over when going into soft verges that may not be able to support the weight of the vehicle. Driver trainees will experience a simulation and learn the correct steps to take if they are on a narrow road with a soft shoulder and there is a second vehicle needing space.
Research has already shown that VR training massively increases the effectiveness of safety training, we believe that you can achieve similar results at a lower cost by going for the same type of gamified training in a desktop or web application, it’s not as immersive as VR training, but achieves similar goals and bridges the gap between traditional training and VR training for amazing value.
Shiift believes using video game technology to create immersive desktop simulations for HSE Training can effectively increase engagement and skill retention in all types of training for workplace safety or driver training across different industries. You can read more about our immersive desktop simulations here.
Or schedule a demo with us to have a deeper dive into how we can take your training courses to the next step with our revolutionary bespoke training application development, whether you need immersive desktop simulations, virtual reality training, engaging videos, or anything else!
Get in touch.
Send us a message and we’ll get
back to you within 48 hours.
Alternatively, email
hello@shiifttraining.com
Deliver next generation training. Get in touch.
Email us at hello@shiifttraining.com or send
us a message and we’ll be in touch within 48hrs.